There is an increasing demand in the area of industrial communication on IP based intercom stations. Typical applications are e.g. emergency phones. The most important argument for an IP based solution is the cost for the separate dedicated cabling required for conventional solutions in a distributed environment of an industrial factory. Additionally IP based systems enable remote maintenance and control.
|
The VoIP Intercom Light System developed by Oregano Systems enables you to setup a cost effective, rugged industrial intercom or emergency call system. The VoIP Intercom Light System is a cost optimized version of the well established VoIP Intercom II PoE System, that has been sucessfully used for many years by our customers. |
The VoIP Intercom Light System supports both the SIP protocol.
VoIP Intercom Light Board
Every remote station is equipped with a VoIP Intercom Light Board. The board is provided with a simple rugged user interface.
- Microphone
- Speaker 10 W audio power
- Call button
The VoIP Intercom Light Board offers one Ethernet interfaces (10/100 Mbit/s). There is one input port for a call button and one opto coupled output port available.
VoIP Intercom Light Firmware
The VoIP Intercom Light Firmware is made up of the following three parts:
- Boot Loader
- Operating System
- Application
The application is responsible for the call processing as well as the communication with the user.
Remote Maintenance
The VoIP Intercom Light Boards may be maintained remotely. Each board holds a boot loader. The application is loaded during booting from the central host. For this purpose one may choose to use either one of the following protocols: TFTP, BOOTP or DHCP. This enables simple in field upgrade. The application may be of course also stored in the on-board Flash memory of the VoIP Intercom Light Board.
Brief Data Sheet: VoIP Intercom II PoE
There is a Brief Data Sheet (PDF-File) of the VoIP Intercom Light System. If you'll need more or detailled informationen please contact us!